PROFESSIONAL HEATING SERVICES IN ATLANTA, GA

Best Heating Services in the Greater Atlanta, GA

From Gwinnett County to Fulton County and beyond, no one offers more dependable heating services than Bolton Plumbing, HVAC & Fireplaces. Our heating services in Atlanta, GA, have kept people warm for over three decades thanks to our quick and reliable heating repairs, dependable heating replacement services, and thorough heating maintenance services.

Our licensed and certified technicians receive ongoing training to ensure our pros’ skills remain sharp and in tune with the latest industry trends and technological advancements. If you’re in need of expert heating services, get in touch with our team today!

Efficient Gas Furnace Repair

Is your gas furnace not acting right? Whether it’s making strange noises or failing to keep your home in DeKalb County or nearby warm, it’s essential to have your system checked out right away! The longer you wait to address your unit’s need for a heating repair, the more damage your heating system will incur—and the more the heating repair will cost.

When it comes to your home heating system, you want a heating service in Atlanta, GA, that can address any potential issues quickly and efficiently. You can count on Bolton’s highly experienced professionals to recommend the solution your system needs and follow through with performing the necessary heating service.

Gas Furnace Replacement and Installation

Unfortunately, no heating system lasts forever. When it’s time to replace an old or inefficient system, homeowners in Fulton County, DeKalb County, and beyond can take comfort in Bolton’s gas furnace replacement and overall heating installation cost. Our residential heating contractors stick by your side, from beginning to end, to help you choose the perfect heating system for your home. We’ll also provide you with an estimate for your services without any annoying sales pressure.

Furnace Maintenance

It may have been a while since you last turned on your furnace. In the time since you last used it, certain aspects of your system may have fallen into disrepair, and you won’t know until it’s too late. The right heating services in Atlanta, GA, can help you have the confidence that your furnace is ready to handle whatever the Georgia winter throws your way!

Certify your furnace performs its best with Bolton’s furnace and heating maintenance services. From seasonal system maintenance to routine checkups, our residential heating contractors will thoroughly examine your furnace, inside and out, to reveal potential issues. Following our inspection, we’ll recommend and perform any heating service needed to restore your furnace’s peak operation.

Heat Pumps for Your Home Heating System

More homeowners are looking to find cost-effective ways of heating and cooling their homes without installing costly and separate heating and cooling systems. A heat pump can be their solution for those looking into new energy-efficient alternatives!

Our team can walk you through how the initial heating installation costs will be offset by the amount of energy you save during the year and the reduction in your heating and cooling bills. Bolton Heating, Air & Fireplaces has access to the top heat pumps on the market and can get them installed in your home in no time!

FAQs

Q: How much does it cost to fix central heating?

A: A central heating system is made up of many working parts. This question is tricky, however, with so many variables affecting your overall repair cost. Depending on the complexity of the problem, a gas furnace repair can cost $375 – $1,200 on average, according to Home Advisor.

If your furnace is under warranty, the cost of replacement parts may be covered. However, you may have to pay for the heating service visit and labor. When your furnace is no longer under warranty, the cost will depend on the problem. A cracked heat exchanger or a problem with the motor, fan, or wiring may cost more to fix due to the price of the replacement parts. The furnace’s age, size, and overall condition also factor into the repair cost.

Q: What do you do when your central heating stops working?

A: Call Bolton right away. The longer you wait to address an issue, the more likely the issue will escalate and cost more to fix. At Bolton, we don’t want you to pay for a heating service visit if we can address the problem with a simple solution. So, while it’s important to act quickly when you spot the need for a heating repair, we suggest you:

1. Change your unit’s filter.
2. Check your thermostat’s batteries.
3. Make sure your thermostat is on “heat.”
4. Open the thermostat and gently blow away the dust.
5. If the problem persists, call Bolton.

Q: Why is my thermostat not working?

A: Depending on your thermostat’s reading and your HVAC system’s heat output, there are many possible issues and solutions. If your thermostat has batteries, then the first thing we suggest is to replace them. If this doesn’t resolve the issue, then call Bolton for help! There are many thermostats on the market, but our team is trained to handle them all. Our technicians will use their expertise to determine why your thermostat isn’t functioning correctly.

Q: Why is cold air blowing when the heat is on?

A: This is a clear sign that something is wrong! The problem could be as simple as a dirty air filter, or it could be more complex and require repair. But there’s no need to play the guessing game. Give Bolton a call, and our pros will diagnose the issue with your heating system and recommend the solution it needs.

At Bolton, our heating services in Atlanta, GA, care about your budget. That’s why, to avoid paying for an unnecessary service call, we suggest you:

• Check your system’s filter and replace it if needed.
• Check your system’s thermostat. Replace the batteries if required and verify it’s set to heat mode.
• Similar to rebooting your computer, try turning off the furnace switch and then turning it back on.
• If these steps don’t work, call Bolton.

Contact Bolton Today

If you have an on-demand heating service in Atlanta, GA, that needs fixing now, our professionals can take care of it. Give us a call today!

• How much does it cost to fix central heating?

  A central heating system is made up of many working parts. With so many variables that could affect your overall repair cost, this question is tricky. However, depending on the complexity of the problem, a gas furnace repair can cost $375 to $1,200 on average, according to Home Advisor.

  If your furnace is under warranty, the cost of replacement parts may be covered. However, you may have to pay for the heating service visit and labor. When your furnace is no longer under warranty, the cost will depend on the problem. A cracked heat exchanger or a problem with the motor, fan or wiring may cost more to fix due to the price of the replacement parts. The furnace’s age, size and overall condition also factor into the repair cost.

• What do you do when your central heating stops working?

  Call Bolton right away. The longer you wait to address an issue, the more likely the issue will escalate and cost more to fix. At Bolton, we don’t want you to pay for a heating service visit if the problem can be addressed with a simple solution. So, while it’s important to act quickly when you spot the need for a heating repair, we suggest you:

  1. Change your unit’s filter.
  2. Check your thermostat’s batteries.
  3. Make sure your thermostat is on “heat.”
  4. Open the thermostat and gently blow away dust.
  5. If the problem persists, call Bolton.
• Why is my thermostat not working?

  Depending on your thermostat’s reading and your HVAC system’s heat output, there are many possible issues and solutions. If your thermostat has batteries, then the first thing we suggest is to replace them. If this doesn’t resolve the issue, then call Bolton for help! There are many thermostats on the market, but our team is trained to handle them all. Our technicians will use their expertise to determine why your thermostat isn’t functioning properly.

• Why is cold air blowing when the heat is on?

  This is a clear sign that something is wrong! The problem could be as simple as a dirty air filter or it could be more complex and require a repair. But there’s no need to play the guessing game. Give Bolton a call. Our pros will diagnose the issue with your heating system and recommend the solution it needs.

  At Bolton, we care about your budget. That’s why, to avoid paying for an unnecessary service call, we suggest you:

  • Check your system’s filter and replace it if needed.
  • Check your system’s thermostat. Replace the batteries if needed and verify it’s set to heat mode.
  • Similar to rebooting your computer, try turning off the furnace switch and then turning it back on.
  • If these steps don’t work, call Bolton.

Contact Bolton Today!

If you have an on-demand heating service that needs fixing now, our professionals can take care of it. Contact us online or call (470) 238-8060 today!

Want to ensure your Gwinnett County, Fulton County or DeKalb County home is as comfortable, healthy and safe as it should be? We can help with that, too! Check out our menu of ductwork solutions or learn more about why you should schedule an affordable home energy audit!